A Room With Plaster Walls

Here are some suggestions that a room with plaster walls.

You must:

Hammer and screwdriver to a variety of hardware.

a metal spackling tool, fabric softener, a sponge and bucket for disposal and cleanup of spills background.

Mesh Band, spackling compound, and a narrow and a wide spackling tool to repair holes and cracks.

Plastic wood putty to holes in the doors and windows.

Sandpaper of different grain

a study on the walls in a bad state

a semi-gloss or gloss paints and varnishes,

a variety of brushes and rollers and Pan

Paint stirrers

Color and tape closed

Knives with fresh leaves

Tissue

Clear the room of all furniture and remove nails, screws, curtain rods, cables, power outlet and turn the cover and pull-out. Place tissue. If there is wallpaper, the warm water and fabric softener in a bucket, a sponge and a part of the wall. Wait a few minutes to remove or scrape with a metal spackling tool. After the wallpaper is removed, the residue of glue from the wall completely.

Place mesh tape over all large cracks or large holes. Cover lightly with putty and smooth with filler tool. If not easy, on a test to a new level of dry, and then a second layer with filler and good work again. Check all cracks and holes with filler. If the holes patched and dry, sand smooth. Use plastic wood putty to fill all the holes in the wood and sand. Brush off the dust from all surfaces before painting.

If you look at the reduction of timber, follow the instructions to paint stripper. Otherwise, go to the next step.

Use the proximity of the painter's tape to tape all the edges of the glass windows. Volume can also be used to protect the forest edge or hardware on a door. Use the painting (color, or if more than the bare wood) and an angle cut brush to paint the window frames, doors, bases and moldings. Keep a damp hand to paint drips. Let dry and, if necessary, repeat coats. Remove the painters tape when you are finished.

Stir primer or paint on the wall in a pan and a little color. When it is necessary, painters tape to protect the painted forms. Use the brush along the cutting and molding and the ceiling and corners. Pour into a saucepan on the role and use the walls of the paint roller. Move the roller in random directions to prevent strokes. Repeat if necessary. Touch areas are necessary. Cleaning and replacement of electrical and includes curtain rods.